Accessories
Thermally Controlled and Monitored Roof Fan Trays
Same footprint as a 119mm2 fan - easily fitted into a fan tray.
Dual thermistor control with failure alarm.
Volt-free relay contact alarm output for all alarms.
Fan shutdown feature for power saving and noise reduction
User programmable functions with easy jumper select.
Tri-colour LED giving visual alarm for fan fail, over-temp and thermistor fail.
Universal auto-select mains input (100 - 230V AC)
Roof Mounted Tray
(DRS-FTP5G)
Seperate Module
(DRS-TCM1000)
Jumper Ring Panels
To compliment the unique Access open frame, effective horizontal cable management remains a necessary element of any cabling system. Based on universal 19" mounting centres (IEC 297 standard), the 1U and 2U high panels have welded cable support hoops.
Jumper Ring Panel 1U (DRS-JRP1)
Jumper Ring Panel 2U (DRS-JRP2)
Fixed Shelves - Quick Fit Range
Ventilated shelf to assist convection
Unique bracket requires no fixings.
Simple thumb screw locks shelf in position.
Add and remove shelves in seconds.
Designed for loads up to 35kg
Full width versions to suit 800 wide cabinets with no vertical cable channels fitted.
Made from 1.2mm mild steel. Light grey powder paint finish.
19" Width, 450mm Depth (DRS-HDASV45AS)
19" Width, 550mm Depth (DRS-HDASV55AS),
19" Width, 650mm Depth (DRS-HDASV65AS)
Full width, 450mm Depth (DRS-QRSVFW45)
Full width, 650mm Depth ( QRSVFW65)
Sliding Shelves - Universal Fit Range
Vented Shelf to Assist Convection.
Adjustable Rear Bracket.
Fits any 19" rack by utilising front and rear mountings.
Designed for loads up to 45kg if supported equally on the vertical panel mounting angles.
Made from 1.5mm mild steel. Light grey powder paint finish.
Min-Max Front to Rear 19' rail spacing 444-749, 455mm Depth (LDATSV45)
Min-Max Front to Rear 19' rail spacing 444-812, 555mm Depth (LDATSV55)
Sliding Shelves - Fixed Depth Full Width
A full width ventilated shelf 450mm deep for fitting into 800mm wide racks with the rails fitted to the extreme outside edges. This is a fixed depth shelf and the rails must be fitted 450mm apart. Designed for loads up to 35kg evenly distributed. (TFWSV45)
ChassisTrays
Ventilated tray with fixings to fit directly on chassis runners (order separately).
230mm Depth (DRS-CT230)
455mm Depth (DRS-CT455)
Sliding Keyboard Shelf
Enables a standard keyboard to be used in any 19" rack. Turntable permits a keyboard which is wider than 450mm to be turned through 90° for storage. Universal mounting brackets fit uprights set between 450mm and 750mm apart. Depth adjustable between 450 & 750mm - Universal mounting fits any standard 19" rack (DRS-KT750)
Cabinet Plinths Kit
600mm Width x 600mm Depth
600mm Width x 800mm Depth
800mm Width x 600mm Depth
800mm Width x 800mm Depth
Other Accessories
Castors - 4 DRS-ECC)
Jacking Feet- 4 (DRS-ECJ)
EC Baying Kit (EBK)
EC Earth Kit (EEK)
19" Mount Fan Tray
Fits directly to panel mounts.
230V AC Fans.
Neon power indicator.
Occupies only 1U of rack space.
Front panel metalwork 3.0mm powder coated mild steel
Other metalwork 1.2mm powder coated mild steel
2 metre mains lead included
Ventilation Unit - 3 Fans
Ventilation Unit - 6 Fans
Vertical Power Distribution Unit
Can be fitted either to the 19" mounting rails or to the cable tray.
13 AMP, 4 Way (D13-4)
13 AMP, 5 Way (D13-5)
13 AMP, 6 Way (D13-6)
13 AMP, 8 Way (D13-8)
13 AMP, 10 Way (D13-10)
13 AMP, 12 Way (D13-12)
EU Schuko, 4 Way (D13-4SCH)
EU Schuko, 5 Way (D13-5SCH)
EU Schuko, 6 Way (D13-6SCH)
EU Schuko, 8 Way (D13-8SCH)
EU Schuko, 10 Way (D13-10SCH)
EU Schuko, 12 Way (D13-5SCH)
Please note that the standard PDUs above have a switched input with a cable length of 3m. If you have any PDU requirements in addition to those shown above, please contact us.
Fixed Shelves - Heavy Duty Range
Heavy Duty fixed shelf 450/550/650/750 mm deep versions.
Designed for loads up to 90kg if supported equally on the vertical panel mounting angles.
Full width versions to suit 800 wide cabinets with no vertical cable channels fitted.
Made from 2mm mild steel. Light grey powder paint finish.
19" width, 450mm Depth (HDASV45AS)
19" width, 550mm Depth (HDASV55AS)
19" Width, 650mm Depth (HDASV65AS)
Full Width, 450mm D (HDASVFW55AS)
Full Width, 650mm D (HDASVFW65AS)
Sliding Shelves - Quick Fit
Vented Shelf to Assist Convection
Adjustable Rear Bracket
Unique Fitting Requries No Tools
125kg load rating when supported equally on the vertical panel mounting edges.
Made from 1.5mm mild steel. Light grey powder paint finish.
Min-Max Front to Rear 19' rail spacing 363-513, 19" Width, 450mm Depth (QRTSV45)
Min-Max Front to Rear 19' rail spacing 513-663, 19" Width, 600mm Depth (QRTSV60)
Min-Max Front to Rear 19' rail spacing 663-813, 19" Width, 750mm Depth (QRTVS75)
Min-Max Front to Rear 19' rail spacing 363-513, Full Width, 450mm D (QRTSVFW45)
Min-Max Front to Rear 19' rail spacing 513-663, Full Width, 450mm D (QRTSVFW60)
Chasis Supports
Fits directly between front/rear 19" mounting angles to accept standard vented 'chassis tray' (order separately) or customers' equipment. 1 pair supplied
380mm Depth (CR39)
444mm Depth (CR45)
571mm Depth (CR58)
627mm Depth (CR62)
Cantilever Shelves
Fit to front face of 19" mounting angles, with angles set at standard 19" width. Ideal for modems, hubs or other networking equipment. Made from 1.5mm mild steel. Light grey powder paint finish.
1U Height, 190mm Depth (DRS-MS19)
2U Height, 400mm (DRS-MS40)
3U Height, 400mm Depth (DRS-MS403)
Thermally Controlled and Monitored Roof Fan Trays
Same footprint as a 119mm2 fan - easily fitted into a fan tray.
Dual thermistor control with failure alarm.
Volt-free relay contact alarm output for all alarms.
Fan shutdown feature for power saving and noise reduction
User programmable functions with easy jumper select.
Tri-colour LED giving visual alarm for fan fail, over-temp and thermistor fail.
Universal auto-select mains input (100 - 230V AC)
Roof Mounted Tray
(DRS-FTP5G)
Seperate Module
(DRS-TCM1000)
Jumper Ring Panels
To compliment the unique Access open frame, effective horizontal cable management remains a necessary element of any cabling system. Based on universal 19" mounting centres (IEC 297 standard), the 1U and 2U high panels have welded cable support hoops.
Jumper Ring Panel 1U (DRS-JRP1)
Jumper Ring Panel 2U (DRS-JRP2)
Fixed Shelves - Quick Fit Range
Ventilated shelf to assist convection
Unique bracket requires no fixings.
Simple thumb screw locks shelf in position.
Add and remove shelves in seconds.
Designed for loads up to 35kg
Full width versions to suit 800 wide cabinets with no vertical cable channels fitted.
Made from 1.2mm mild steel. Light grey powder paint finish.
19" Width, 450mm Depth (DRS-HDASV45AS)
19" Width, 550mm Depth (DRS-HDASV55AS),
19" Width, 650mm Depth (DRS-HDASV65AS)
Full width, 450mm Depth (DRS-QRSVFW45)
Full width, 650mm Depth ( QRSVFW65)
Sliding Shelves - Universal Fit Range
Vented Shelf to Assist Convection.
Adjustable Rear Bracket.
Fits any 19" rack by utilising front and rear mountings.
Designed for loads up to 45kg if supported equally on the vertical panel mounting angles.
Made from 1.5mm mild steel. Light grey powder paint finish.
Min-Max Front to Rear 19' rail spacing 444-749, 455mm Depth (LDATSV45)
Min-Max Front to Rear 19' rail spacing 444-812, 555mm Depth (LDATSV55)
Sliding Shelves - Fixed Depth Full Width
A full width ventilated shelf 450mm deep for fitting into 800mm wide racks with the rails fitted to the extreme outside edges. This is a fixed depth shelf and the rails must be fitted 450mm apart. Designed for loads up to 35kg evenly distributed. (TFWSV45)
ChassisTrays
Ventilated tray with fixings to fit directly on chassis runners (order separately).
230mm Depth (DRS-CT230)
455mm Depth (DRS-CT455)
Sliding Keyboard Shelf
Enables a standard keyboard to be used in any 19" rack. Turntable permits a keyboard which is wider than 450mm to be turned through 90° for storage. Universal mounting brackets fit uprights set between 450mm and 750mm apart. Depth adjustable between 450 & 750mm - Universal mounting fits any standard 19" rack (DRS-KT750)
Cabinet Plinths Kit
600mm Width x 600mm Depth
600mm Width x 800mm Depth
800mm Width x 600mm Depth
800mm Width x 800mm Depth
Other Accessories
Castors - 4 DRS-ECC)
Jacking Feet- 4 (DRS-ECJ)
EC Baying Kit (EBK)
EC Earth Kit (EEK)
19" Mount Fan Tray
Fits directly to panel mounts.
230V AC Fans.
Neon power indicator.
Occupies only 1U of rack space.
Front panel metalwork 3.0mm powder coated mild steel
Other metalwork 1.2mm powder coated mild steel
2 metre mains lead included
Ventilation Unit - 3 Fans
Ventilation Unit - 6 Fans
Vertical Power Distribution Unit
Can be fitted either to the 19" mounting rails or to the cable tray.
13 AMP, 4 Way (D13-4)
13 AMP, 5 Way (D13-5)
13 AMP, 6 Way (D13-6)
13 AMP, 8 Way (D13-8)
13 AMP, 10 Way (D13-10)
13 AMP, 12 Way (D13-12)
EU Schuko, 4 Way (D13-4SCH)
EU Schuko, 5 Way (D13-5SCH)
EU Schuko, 6 Way (D13-6SCH)
EU Schuko, 8 Way (D13-8SCH)
EU Schuko, 10 Way (D13-10SCH)
EU Schuko, 12 Way (D13-5SCH)
Please note that the standard PDUs above have a switched input with a cable length of 3m. If you have any PDU requirements in addition to those shown above, please contact us.
Fixed Shelves - Heavy Duty Range
Heavy Duty fixed shelf 450/550/650/750 mm deep versions.
Designed for loads up to 90kg if supported equally on the vertical panel mounting angles.
Full width versions to suit 800 wide cabinets with no vertical cable channels fitted.
Made from 2mm mild steel. Light grey powder paint finish.
19" width, 450mm Depth (HDASV45AS)
19" width, 550mm Depth (HDASV55AS)
19" Width, 650mm Depth (HDASV65AS)
Full Width, 450mm D (HDASVFW55AS)
Full Width, 650mm D (HDASVFW65AS)
Sliding Shelves - Quick Fit
Vented Shelf to Assist Convection
Adjustable Rear Bracket
Unique Fitting Requries No Tools
125kg load rating when supported equally on the vertical panel mounting edges.
Made from 1.5mm mild steel. Light grey powder paint finish.
Min-Max Front to Rear 19' rail spacing 363-513, 19" Width, 450mm Depth (QRTSV45)
Min-Max Front to Rear 19' rail spacing 513-663, 19" Width, 600mm Depth (QRTSV60)
Min-Max Front to Rear 19' rail spacing 663-813, 19" Width, 750mm Depth (QRTVS75)
Min-Max Front to Rear 19' rail spacing 363-513, Full Width, 450mm D (QRTSVFW45)
Min-Max Front to Rear 19' rail spacing 513-663, Full Width, 450mm D (QRTSVFW60)
Chasis Supports
Fits directly between front/rear 19" mounting angles to accept standard vented 'chassis tray' (order separately) or customers' equipment. 1 pair supplied
380mm Depth (CR39)
444mm Depth (CR45)
571mm Depth (CR58)
627mm Depth (CR62)
Cantilever Shelves
Fit to front face of 19" mounting angles, with angles set at standard 19" width. Ideal for modems, hubs or other networking equipment. Made from 1.5mm mild steel. Light grey powder paint finish.
1U Height, 190mm Depth (DRS-MS19)
2U Height, 400mm (DRS-MS40)
3U Height, 400mm Depth (DRS-MS403)
Cables
UTP CAT.5e cable, 24AWG,4 x 2 x 0.511mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.511mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.48mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.48mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
FTP CAT.5e cable, 24AWG,4 x 2 x 0.52mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
FTP CAT.5e cable, 24AWG,4 x 2 x 0.52mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.6 cable, 23AWG,4 x 2 x 0.58mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.6 cable, 23AWG,4 x 2 x 0.58mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
Cat.5e keystone Jack (unshielded) ( tooless )
Cat.5e keystone Jack (unshielded) ( 180 degree )
Cat.5e keystone Jack (unshielded) ( 90 degree )
Cat.5e keystone Jack ( shielded)
Cat.6 keystone Jack (unshielded) ( tooless )
Cat.6 keystone Jack (unshielded) ( 180 degree )
Cat.6 keystone Jack (unshielded) ( 90 degree )
Cat.6 keystone Jack (shielded)
Cat.5e Patch Panel,12 port (loaded keystone jack) ( unshielded)
Cat.5e Patch Panel,24 port (loaded keystone jack) ( unshielded)
Cat.5e Patch Panel,48 port (loaded keystone jack) ( unshielded)
Cat.6 Patch Panel,12 port (loaded keystone jack) ( unshielded)
Cat.6 Patch Panel,24 port (loaded keystone jack) ( unshielded)
Face Plate Single Port
Face Plate Double Port
Face Plate 4 Port
UTP CAT.3 CABLE [ Telephone Cable ]
2 pairs (0.45mm)
3 pairs (0.45mm)
4 pairs (0.45mm)
6 pairs (0.45mm)
10 pairs (0.45mm)
12 pairs (0.45mm)
16 pairs (0.45mm)
25 pairs (0.45mm)
Cat 5e UTP patch cables
UTP CAT.5e cable, 24AWG,4 x 2 x 0.511mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.511mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.48mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.5e cable, 24AWG,4 x 2 x 0.48mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
FTP CAT.5e cable, 24AWG,4 x 2 x 0.52mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
FTP CAT.5e cable, 24AWG,4 x 2 x 0.52mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.6 cable, 23AWG,4 x 2 x 0.58mm bare solid copper, PVC Jacket ,Pass DSP 4300 Fluke Test
UTP CAT.6 cable, 23AWG,4 x 2 x 0.58mm bare solid copper, LSZH Jacket ,Pass DSP 4300 Fluke Test
Cat.5e keystone Jack (unshielded) ( tooless )
Cat.5e keystone Jack (unshielded) ( 180 degree )
Cat.5e keystone Jack (unshielded) ( 90 degree )
Cat.5e keystone Jack ( shielded)
Cat.6 keystone Jack (unshielded) ( tooless )
Cat.6 keystone Jack (unshielded) ( 180 degree )
Cat.6 keystone Jack (unshielded) ( 90 degree )
Cat.6 keystone Jack (shielded)
Cat.5e Patch Panel,12 port (loaded keystone jack) ( unshielded)
Cat.5e Patch Panel,24 port (loaded keystone jack) ( unshielded)
Cat.5e Patch Panel,48 port (loaded keystone jack) ( unshielded)
Cat.6 Patch Panel,12 port (loaded keystone jack) ( unshielded)
Cat.6 Patch Panel,24 port (loaded keystone jack) ( unshielded)
Face Plate Single Port
Face Plate Double Port
Face Plate 4 Port
UTP CAT.3 CABLE [ Telephone Cable ]
2 pairs (0.45mm)
3 pairs (0.45mm)
4 pairs (0.45mm)
6 pairs (0.45mm)
10 pairs (0.45mm)
12 pairs (0.45mm)
16 pairs (0.45mm)
25 pairs (0.45mm)
Cat 5e UTP patch cables